Whirlpool has introduced a variety of home appliances, which include top-notch front load washers, top load washers, etc. These advancements have made laundry quite easy. Just clicking of some key and we are done with it. The problem arises when after clothes are done with the cycle but the dryer is not working properly or not working at all.
The dryer has made this chore very easy and handy to do but if it suddenly stops working or not working suitably it can get stressful as it is very laborious to take the clothes out of the washer and then hang them. Before you start hitting your head on the wall, we are there to rescue you with some guidance that you can follow and analyze the situation.
1 Puffed Thermal Fuse:
The thermal fuse is the safety measure in the dryers. If the temperature of the dryer is exceeding then the fuse will trip them to shut down to cut off the heat. This prevent the fire too broke out. Although it is used for safe the trip fuse can cause problems as in some models it may cause the dryer to not work.
How to repair it:
Firstly, you can try testing the fuse with a multimeter it shows no continuity then you have to replace the fuse with the new one so your dryer can work again.
2 Faulty Heating Element:
The main purpose of the heating element is to produce the desired amount of heat that is required to dry up the clothes efficiently. If the heating element is broken it will produce no heat or in some cases, it can produce excessive heat which can be too dangerous. In short, it will disturb the process of drying.
How to repair it:
You can use a multimeter to check the device but it is wise to change the heating element to stay on the safe side.
3 Defective Gas Valve Solenoid:
Gas Valve Solenoids are the component in the dryers which are gas-powered. Their purpose is to control the flow of gas in the burner by closing or opening the valve. If the valve gets defective they will not be able to control the flow of gases which can lead to hazards or this will cause the dryer to produce no heat at all.
How to repair it:
Most importantly, the failure of the valve can cause the leakage of gas so it is better to get a professional technician to address the issue. It is not wise to inspect it yourself as it is very dangerous to do so.
4 Faulty Igniter:
The igniter is the key component as the gas which enters the burner is lit by the igniter. As is constantly in contact with the heat its sensitive meat get corrode over time and with time it will not be able to produce enough heat to ignite the gas in the burner as a result the dryer may not work or clothes will not be dried effectively.
How to repair it:
1 Unplug your dryer from the power.
2 Locate the igniter and check for any visible damage.
3 Use a multimeter to check if it working or not.
4 Contact a technician to solve your issue.
5 Flame Sensor:
In a dryer, a flame sensor is a safety device that inspects the presence of flame when the burner is being used and it sends signals to the control board of the dryer to keep the valve open when flames are present. If it gets malfunctioned then it can lead to some issues such as the valve may not remain open to due wrong signals sent to the control board or it can remain constantly open which is not advisable
How to repair it:
One should contact the professional and let them do the diagnosis of the issue.
6 Obstruct Dryer Vent:
The dryer vent plays an important role as it maintains the flow of air in and out of the dryer, it expels out the hot air and ensures safety. However, it can often get clogged due to the accumulation of lint, dust, and foreign particles which restrict the flow of air and cause the dryer not to work efficiently or not at all.
How to repair it:
1 Unplug the power from the dryer.
2 Locate the vent outlet and remove the vent cover.
3 Inspect the vent and try to thoroughly clean the vent exteriorly.
4 Try to clean the duct from the inside.
5 After, cleaning the duct reassemble it then try to test your dryer again.
7 Defective Thermistor:
A thermistor is a crucial component as it monitors the temperature inside the dyer. A standard temperature has to be maintained to ensure that clothes are dried up efficiently. If the thermistor is not working properly it will not help to control the temperature and it can cause the dryer to not work at all.
How to repair it:
Inspect your thermistor by using the multimeter. If it is not working properly then it should be replaced.
8 High Limit Thermostat:
High-limit thermostat manages the dryer temperature and if it has reached the required heat then the burner will shut down so no excess heat is being produced. However, if the high-limit thermostat malfunctions it may not shut down and cause potential hazards.
How to repair it:
Firstly, check for any visible damages. Then check the device by using the multimeter if it is not working properly it should be replaced with a new one.
9 Control Board:
As we know the control board is a like a human brain of a machine which regulates every function of the dryer. However, sometimes they also get faulty and generate wrong signals which can cause the dryer not to heat at all.
How to repair it:
1 Unplug your dryer from power.
2 Inspect your control board and check for any visible damage or particles.
3 If you are still facing the issue then you should seek help from a professional.
10 Defective Timer:
Managing time in the dryer is most important so clothes are dried up skillfully and they are not damp or moist. Sometimes, the timer gets faulty which causes the dryer to not work expertly
How to repair it:
You should check your timer if it is broken or damaged and possibly you should change the timer so your washer is good to go.
Conclusion:
These types of machinery have indeed made life easier but sometimes they can give you quite trouble just like the dryer not working skillfully, However, let’s not worry as we have provided you the guidance which you can follow to understand the situation and to take action according to it. It is also better to take help from professionals and let them do their magic.