Samsung mini split Error Codes Guide will assist users in decoding errors that might appear using it. It should be clear that some of the error codes displayed are the routine running operation (such as CL/ Auto-clean indicator, CF/ Auto-defrost etc.), whereas others might define faults in the system (like C2/ indoor pipe sensor fault, E4/ forced defrost etc.). This guide will help consumers to find out the way of decoding these codes as well as the very next approach to go with for the solution.
There are some very important steps to follow when your Samsung mini split Air conditioner comes up with such errors:
- The first thing to do is decode the error code, which means you need to find out the meaning of the error.
- The second thing is to see the most probable reason behind these errors or you can say the cause of the error.
- Third and the last thing to do is remove the error by solving the underlying cause.
By following these steps you can easily get rid of these errors.
For your assistance in this matter we are going to mention the seventeen most common error codes that pops-up during system operations, also the definition of these errors and the optimal solution for them.
Seventeen most common error codes and their optimal solution.
Samsung mini split AC Error code CL (Auto-Clean indicator).
Error code CL is a common error which refers that Air Conditioner is getting ready for working on cleaning as there might be some noisome. There is no need to worry about the solution as it is not a faulty error code you just need to command Auto-cleaning.
Samsung AC error code CF (Filter cleaning/ Filter reset).
Error code CF defines the need for filter cleaning or replacement of the filter as there might be some blockage in the filter. It works as a reminder, to solve this problem simply clean or replace the filter.
Samsung AC error code DF (Automatic defrost).
Usually, AC shows a code of DF when the coil is iced and the system can not properly work so it starts defrosting itself in this case there is no need to worry about anything this process may take a while (10-15 minutes) best solution is to sit back and wait for completion of the process.
Samsung AC error code E3 (Indoor fan-motor failure).
E3 error code shows up when there is some failure in working of the indoor fan motor there can be two main causes, first is the fault in the motor or the second can be the fault in the circuit board in both scenarios the best solution is to get the help of a professional for replacement or repairing purposes.
Samsung AC error code E4 (Forced defrost mode).
E4 refers to the forced defrost mode which means it is not an automatic function there is some cause by which the system is forced to enter the cycle of defrosting. The main reasons behind this can be:
- Fault in the sensor.
- Less refrigerant material.
- Heat pump disorder.
- Inflexion of temperature.
For solving this problem, get the help of a professional or you can get assistance from the Samsung service centre in this condition.
Samsung AC error code E5 (Open/short indoor heat exchanger sensor).
Error code E5 points out that the indoor heat exchanging sensor is short or open. In both conditions it is important to get the faulty sensor replaced so for the solution to this problem it is advised to seek help from the Samsung service centre.
Samsung AC error code E6 (Open/short outdoor heat exchanger sensor).
Same as error code E5 refers to the fault in the indoor heat exchanging sensor, Error code E6 defines a fault in the outdoor heat exchanging sensor which might be open or short so the best solution advised in both conditions is to acquire the help of a Samsung service centre professional.
Samsung AC error code E7 (Open/short heater temperature sensor).
Error code E7 points out some disorder in the heater temperature sensor which might be open or short, in both possibilities it must be fixed as your AC won’t be able to measure the external heat. To solve this issue contact an authorized Samsung service center professional.
Samsung AC error code C2 (Indoor pipe sensor Malfunction).
This error code defines the malfunction of the indoor pipe sensor which measures the room temperature of your room and maintains a balanced environment. So in this scenario solution is to seek the help of an authorized Samsung service centre professional and get your indoor pipe sensor replaced.
Samsung AC error code E101 (Failed communication Indoor).
Error code E101 appears when there is some sort of disconnection of wire around your indoor unit or some connection is broken or losses such as your power cable. It is advised to carefully inspect all your indoor connections and if find some problem fix it if you are having any trouble doing that best solution is to seek the help of a professional.
Samsung AC error code E102 (Failed communication Outdoor).
Error code E102 appears to show some problem in the connectivity of the outdoor unit or some sort of shortage in the power wire do give it a check. If you find any trouble doing that you can seek the help of a Samsung service center-authorized professional for its solution.
Samsung AC error code EL (overheated electric heater).
During the electrical flow there might be some sort of short-circuit in the regulatory board because of inflexion in power that causes overheating, for the solution do check the sensor and printed circuit board regulatory board and by giving proper inspection find out the flaw and replace or repair it.
Samsung AC error code E201 (failed communication between indoor/outdoor units).
Error code E201 refers to the lack of communication between both of the units indoor and outdoor. When this code pops up give a brief check on both unit’s connections and find any loose connection or cable if there is no such issue another cause can be some problem in PCB as well which needs to be replaced, so in this case seek the help of a professional.
Samsung AC error code E1/21 (defective room temperature sensor).
Error code E1/21 takes place when there is some sort of malfunctioning of the room temperature maintenance sensor, as your Air conditioner is troubling to measure your room temperature of the room it can not work properly. For its solution you need to seek the help of the Samsung service center authorized person to change the defective sensor.
Samsung AC error code E1/22 ( heat-exchanging sensor fault).
When the error E1/22 shows up it means your heat exchanging temperature sensor is troubling to measure the surface temperature as a result there is a problem making your place cool or hot. As a solution, you need to acquire the help of a Samsung-authorised professional for sensor replacement.
Samsung AC error code E1/54 ( Faulty capacitor or fan motor).
An air conditioner is unable to provide cool air when error code E1/54 shows up which means that the capacitor may be broken or burnt or the fan motor is properly working in both cases it needs to be fixed or replaced as the solution, so you can contact the nearest authorized Samsung service centre to seek help.
Samsung AC error code E1/63 (Bad EEPROM).
Error E1/63 refers to the defaulted byte erasable chip or it may be corrupted that’s why the error code of faulty EEPROM is popping out and the stored information is gone to solve this problem try to reset your AC, in case you are finding any problem doing that seek the help of Samsung service centre professional.
Other frequently asked Questions.
Besides these 17 common errors, people also use ask,
Error code E4 pops up when your air conditioner is forced to go into defrost mode there can be multiple reasons for that so it is better to seek the help of a professional to resolve the underlying problem
When your indoor sensor pipe is defective your AC finds trouble detecting the heat inside the room so it is essential to replace the defective sensor with a new one.
There can be several reasons behind a blinking light on your AC. Such as:
Dirty or broken filter.
Loose or disconnected wire.
Coils are frozen or iced.
There is low refrigerant material
All of these indications are problematic so it is very important to seek the help of a professional for a. Check on underlying issues.
Before concluding the blog it is advised to always seek the help of a professional to avoid any mishaps.
Although, above mentioned errors are commonly asked errors codes if you see any of them you can seek the help of this article to understand the meaning and find a better solution but in case there is some other error or you are finding it difficult to solve or understand the problem you should contact your nearest Samsung service centre for assistance.