Bosch has successfully made its name as a trusted kitchen appliances brand because it has been delivering to its customers premium quality and reliable home appliances for over 130 years now. However, there’s no denying that everything comes with downsides, which is why even the finest version of Bosch dishwashers can be a total letdown as it is liable to breakage and defects.
We have created a Bosch silence plus 44 DBA troubleshooting guide to help you get to the bottom of probable troubles you might want to be aware of before investing in this model of dishwasher. The good news is that we’ve also covered the magic bullet to get the problems fixed. So, without any further ado let’s get started.
1. Your Bosch Silence Plus 44 DBA Dishwasher frequently gets flooded with clean water by itself
Alright, let’s be real. This one does not seem too big of an issue. I couldn’t get why people who’ve installed this dishwasher at home are creating a fuss over this tiny issue until I realize that overbrimming dishwashers is not the entire problem. Turns out that the overfilled dishwashers cause water to spill on the kitchen floor and end up shelling out money on gigantic water bills.
Coupled up with that is the fact that when your dishwasher is continuously filling itself with water, it may be possible that the inlet valve has seized. A stuck inlet valve makes matters worse by filling the dishwasher with water even when the machine is off.
The water entry valve getting jammed and opened on its own is out of the question. So, what’s the culprit behind it? It turns out that the calcium in hard water is after all this. Calcium buildup clogs the valves and even a slight quantity of water that gets into the valve will cause water levels to go beyond the filter mesh after a couple of hours.
So, before you rush to scrub the nasty clogged inlet valves, which may seem the best possible solution. Hold on! Because there is an even better fix. All you’ve got to do is to get your hands on the Endurance Pro 425458 Dishwasher Water Inlet Valve and replace it with the troublesome valve.
This valve is one of my top recommendations for this unit because it is easy on your wallet, appropriate for Bosch appliances, and above all it helps you in getting rid of overbrimming dishwashers.
2. Bosch Silence Plus 44 DBA gets out of order
One of the biggest drawbacks of this unit that should be considered before installing it is that the malfunctioning motor or flawed wiring could become a stumbling block to its functions. This drawback is also seen in the dishwashers of renowned brands like Whirlpool and Frigidaire. However, sometimes it’s just electrical issues that are keeping your machine from operating. So, don’t jump to a conclusion right away.
Aside from faulty wiring and worn-out motor, other additional problems that become a hurdle in machine operation may also surface which includes:
- The device has been adjusted to delay start. If that’s the case, then you’ll have to wait until the delayed start time passes and after that, your dishwasher is good to go. Or if that’s a prompt operation that you are after, then resetting the device is the best bet.
- Sometimes we turn on the child lock to restrain children from switching on the unit. Inactivating this control lock will resume the unit’s functions.
- You may have forgotten to securely close the unit’s door. Keep in mind to carefully sneck the doors after you are done cleaning dishes.
3. Your Bosch Silence Plus 44 DBA is not draining properly
Of all the troubles that come along with the Bosch dishwasher, the drainage problem is the mightiest! Because when this happens, the used water is likely to get to the bottom of the unit. Which can turn your dishwasher into a breeding ground for germs.
To get this problem fixed we’ve designed a step-by-step solution.
- First up take out the filter and the drain. In case that considerable amount of water has collected over the filter and the drain, you can use a ladle to get them out.
- Next, place a dry towel near the device drain. This will soak all the leftover water and dirt.
- After that, take off the nut with a screwdriver. Taking out the components will help you in exposing the propeller.
- Finally, check the functionality of the impeller by turning it around. If you spot some clusters, wipe them off immediately.
You’ll also spot a rubber check valve. Take that out and examine it for debris. After doing these tiny tweaks the drainage problem will stand no chance and you will get your dishwasher back to work.
4. Your Bosch Silence plus 44 DBA gets flooded with dirty water
Any negligence in cleaning dishwashers harms your health because dishwashers not only wash dishes but also let you store them. Apart from the inlet valve, there’s another valve within the Bosch dishwasher called the check valve. This check valve is a major player when it comes to draining dirty and used water. The problem crops up when the check valve is cracked or damaged. This will result in dirty water entering the dishwasher. When this happens switching the old broken check valve with Bosch 00165262 Check Valve can save you from a lot of trouble and hospital trips.
This affordable Bosch 00165262 Check Valve can be installed on your own by following a few basic steps.
- Unlatching the door and taking out the lowest rack of the dishwashing machine will make the check valve reachable.
- Take out the bottom spray arm and put it aside safely.
- Take off the filter screen basket from its position after removing the screen which is protecting the basket.
- Remove the lid and draw it out from the device.
- And finally, the defective check valve can be taken off with the help of a flat-tip screwdriver.
After you have fitted a new check valve in place of the previous one, make sure that you’ve done it tightly and securely.
5. Your Bosch Dishwasher is not drying the dishes properly
One of the most frustrating aspects of Bosch dishwashers is that they can sometimes leave your dishes damp and wet. If that’s the case, then the number one suspect is a defective vent. After that, you could blame it on the motor or the heating method of the unit.
Scrutinizing the vent and checking whether the machine’s vent is jammed or not can help you in pinpointing the origin of the problem. If the vent is jammed, then switch it to a new one.
If nothing has occurred to the vent, then go for examining the vent fan motor with the help of a multimeter. Check the operation of the motor and make sure that the fan blades are rotating properly. In case the motor has expired, or the blades are immobile. Get it replaced with a brand-new one.
Another culprit that throws the unit’s performance out of whack is the defective heating mechanism of the machine. If the vent and motor are working optimally, then it’s time to compute the voltage by using a multimeter. If the heating module turns out faulty, then it’s time to replace it.
6. Your Bosch dishwasher fails to fill up with water
Dishwashers are made to help you with cleaning dishes, and when the unit fails to fill up with water, it remains of no use. When your dishwashers fail to load up with water, some sort of damage has occurred to the water entry valve.
You can make this problem disappear by substituting the faulty inlet valve with an affordable and compatible valve like the Bosch 00628334 Dishwasher Water Inlet Valve.
7. The Bosch Dishwashers buttons are not working.
The Bosch dishwasher has got some buttons to help us in communicating with the device and modulate the operations. When these buttons fail to respond to your command, you won’t be able to bring about the desired operation. This problem could arise when something is blocking the functions of the button sensors.
If you suspect that there’s some object that’s hindering the button’s functions. Get that out right away and restart the unit. If that’s not the case, then examine the selector knob for defects. If you spot any damage, then you might want to replace it with a new one.
8. Why is your Bosch Dishwasher making pesky noises?
When your Bosch dishwasher is making annoying sounds during operation, then it is trying to alert you about some subtle or serious problem. If the unit is making clattering or buzzing sounds, chances are that some damage has occurred to the water inlet valve. In that case, replacing the faulty valve with a good one can fix the issue.
However, it’s not always a defective water inlet valve. Sometimes the annoying sounds speak of other issues as well including:
- You may be using too much hot water for cleaning dishes.
- It may be a defective motor axle or bearing which is making the motor shaft vibrate.
- The filter screen of the unit may be blocked because of tiny food particles or other items.
I would recommend checking these parts of the machine to pinpoint the area of trouble. After locating the defective area make sure that you fix it right away.
9. Your Bosch dishwasher starts to leak from the motor area
Any leakage from the motor area could be because of a defective pump seal. The dishwasher’s pump is protected from moisture by wrapping it in a sealant that dries out after frequent use. When this happens, the pump starts to leak, and you might want to replace the damaged pump and motor with better ones.
To solve the mystery of leakage, first, you’ll have to find the pain points. We are usually the impeller or the sealant of the drain pump. Once that is done, then the next step is getting the impellers and the seal kits changed.
Fixing the leakage Gordian knot does not require you to invest in the entire pump-motor set-up If you are lucky enough to find the compatible seal and impellers for the dishwasher alone. However, when rust has attacked the shaft of the motor then fair chances are that you’ll need to toss out and replace the previously defective parts with reliable ones to get the unit back on the job.
Frequently asked questions?
1. How can we reset a Bosch silence Plus 44 DBA?
Resetting the Bosch Silence Plus 44 DBA requires you to press and firmly hold the start button for a few seconds until the machine restarts.
2. How do you activate a diagnostic mode on Bosch Silence Plus 44 DBA?
You can make your device go through a diagnostic mode by simply holding down the start button until a response arises. If you find this process unworkable, then holding down the restart button again three times will do this trick.
3. Why is your Bosch dishwasher not working?
Car engines require fuel to operate, just like your Bosch dishwasher requires water to bring about its functions. So, make sure that the water supply to the unit is adequate.
Conclusion:
It won’t be wrong to say that Bosch has emerged as a trusted and reliable brand for kitchen appliances over the past few years. However, like every other brand on the market, Bosch comes with a downside as well. One of the finest models of Bosch dishwashers like the Bosch Silence Plus 44 DBA can at some time drift into the arms of issues. But the good news is that the problem can be fixed by following a few simples step vigilantly.