Reasons Samsung Washer Not Spinning Clothes Dry
Is your Samsung washer not spinning clothes dry? If yes, then we have discovered some of the reasons that are causing it not to spin. Even though Samsung washers are highly popular for their extensive features. But like other electric appliances and a machine, these washers have certain limitations. These limitations occasionally cause disruptions in the washer’s functioning.
Therefore, one should know how to fix these arising disruptions or problems in the washer.
Some of these issues are common, while others are rare. Hence, after thoroughly expecting Samsung washers, we have come up with a guide that identifies the reasons why these washers do not spin. Moreover, we have also explained how to fix these reasons. Just before diving into the guide, remember that by fixing one of these problems, you can prevent your washer from not spinning.
9 Reasons Why Your Samsung Washer Not Spinning Properly
Now that you know that your washer is not working, you can find out what’s the problem by reading through these probable causes. We have listed below 9 of the most common causes:
- Incorrect Choice of Cycle
Sometimes the choice of washing cycle is incorrect according to the number of clothes. This results in inappropriate drying of clothes. People think that their washer is not working properly. Therefore, it is only the poor selection of the washing cycle which is causing disruption.
- Usage Of Extension Cable
A washer requires an appropriate amount of current for its proper functioning. Occasionally, using an extension cable won’t provide enough current to the washer. Hence, it starts spinning clothes at a slow speed resulting in inappropriate drying.
- Inappropriate Load of Clothes
Loads of clothes in the washer also result in the unsuitable spinning of clothes. If the washer tub is filled to the top, it cannot dry the items properly. Therefore, the immense filling of the tub or drum can be the reason for insufficient spinning.
- Irregular Surface
An irregular surface under the washer prevents its smooth functioning. The reason is that an imbalanced floor creates an imbalance inside the washer preventing it from running and spinning clothes appropriately.
- Defective Washer Door
If the door or lid of the washer is defective, it won’t function. Mostly, the faulty lids of washers are unable to lock. As a result, clothes start coming out of the washer due to overloading.
- Poor Drainage System
The bad drainage system of the washer extensively affects its working. If the drainage is not good, it will cause the water to flow back into the spun clothes. Hence, the water backflow causes the clothes not to spin properly.
- Faulty Washer Belt
Washers have a washer belt that allows the washer to run smoothly. If the washer belt is faulty, it won’t spin clothes dry. In the end, the clothes remain wet even after spinning.
- Poor Functioning Motor
A poorly functioning motor is unable to move the drive belt properly. If the motor is malfunctioning, the spinner doesn’t work. However, sometimes the poor settings also result in poor motor functioning.
- Washer Software Crash
On random occasions, the motor of the washer may stop due to a software crash. An automatic washer requires suitable settings according to the number of clothes. If settings are not suitable the program or software may crash.
9 Stages to Repair Samsung Washer’s Spinning
After you identify what’s the reason for your Samsung washer not spinning, you can repair it easily. Here is a complete guide comprising 9 stages that will help you in repairing your Samsung washer:
Stage 1 – Selecting the right Cycle of the Washer
Clothes have different types of fabrics. Some are delicate, while others are hard or rough. Therefore, we can say that different types of clothes require different types of washing cycles. This means it takes different times to remove water from the clothes to dry them. For instance, a normal cycle helps you to regularly spin the clothes. While quick wash aids in drying clothes quickly.
Carefully select the spin cycle for the laundry you are going to spin. If your laundry is in bulk, select a high washing cycle rather than choosing a slow washing cycle. Moreover, you also have to select the speed of spinning from low to high according to the laundry.
Stage 2 – Avoid Usage of Extension Cable
If you are using an extension cable, chances are that your Samsung washer is not getting enough power. Then it is likely the reason which is causing your Samsung washer not to work properly. This is because the extensions don’t deliver total voltage to the drying machine. If the voltage is not enough, the washer cannot run at sufficient speed. Also, sometimes the washer may stop working mid-way because of a sudden surge of voltage by the extension cable.
The best solution to this problem is to avoid using extension cables. Instead, you should try to use wall sockets while spinning clothes. However, if the wall socket is not available near the washer, change the washer cable. If it is short, replace it with another longer cable so that it can reach the wall socket.
Stage 3 – Choose the Appropriate Load of Laundry
Regarding laundry loads, the two most common issues cause spinners not to perform their functions. One is heavy laundry, and the other is excess laundry. Heavy laundry can cause the washer to become heavy or weigh high. This can stop the washer midway, or if the washer stops at the end of the cycle, you will get only wet clothes. On the other hand, excess laundry also puts pressure on the washer; as a result, it weighs down. Hence, the clothes are not dried properly and remain wet at the end of the spinning cycle.
Put the appropriate load of laundry in the Samsung washer. This means trying to create a balance by spinning light clothes first, followed by spinning heavy clothes. Just remember, do not fill the spinner. Instead, leave a space of at least ¼ to avoid overloading.
Stage 4 – Place Samsung Washer on Regular Surface
One of the major causes of the imbalance of laundry load is the irregular surface. If your Samsung spinner is placed on uneven ground, it will cause an imbalance, and as a result, the laundry will fall out. When this happens, it will either result in incomplete spinning of clothes or no spinning at all. Therefore, the irregular surface area under the washer might be the reason that your washer was not spinning clothes appropriately.
For this issue, change the place where you are keeping the washer. This means placing the washer on a regular surface. If this isn’t possible, adjust the leveling stands of the washer to keep it at an even pace.
Stage 5 – Check the Door of the Washer Before Spinning
The Samsung spinner doesn’t work if its door or lid is not locked. Depending upon the type of spinner, it may have either a front door or a top door. In both cases, the lid should be locked properly. If your washer’s lid is defective, it should be examined. In the front door washer, usually, the faulty door lock is the cause of improper locking. While if the washer has a faulty top door, its door switch might be defective.
If you want to know if the washer’s door is defective or not, do a test checking its continuity level. This can be done using a multimeter. If the test shows no continuity, the door is faulty, and you should replace or fix the door.
Stage 6 – Check the Drainage System of the Samsung Washer
A smooth drainage system allows the washer to spin laundry at an optimum level. On the other hand, a bad drainage system causes a backlash of wastewater or no drainage at all, causing the water to stay in the tub. Therefore, it is necessary to keep the drainage of the washer clean. Check the whole drainage system. For instance, the hose kinks and the pump filter. The hose blockage, inappropriate hose setting, dirty or clogged filter, and defective pump can disrupt the drainage of the washer.
To remove hurdles in the drainage system, straighten the twists in the hose pipe, if any. If the hose is clogged or dirty, try to clean it from any kind of debris. The settings of the hose pipe should be checked accurately. Moreover, you should also check the pump filter and make it free of any dirt or damage.
Stage 7 – Inspect the Washer Belt
As mentioned earlier, Samsung washers have only one drive belt in the motor. If it’s defective, the washer will not spin the clothes completely or not at all. Therefore, the washer belt should be inspected to see if it’s faulty or not. The faulty washer belt could be loose due to immense stretching, it could be cracked due to cracks, or it could have become delicate.
Change the drive belt of the washer if it is faulty. First, check if the belt is cracked, loose, or disrupted. Depending on this, you can tighten the belt or replace it with a new one.
Stage 8 – Observe the Motor Functioning
Samsung washers are software operated. They will start showing errors if the motor is not working. Therefore, there is no need to do any complicated observation. When you get to know that the washer motor is malfunctioning, it should be changed immediately. The reason is that a faulty motor cannot run the drive belt. Hence, the spinner cannot spin.
When you get to know that your motor is defective, change the motor to a new one. After changing, reset the settings of your machine and set it again.
Stage 9 – Inspect the Software of the Samsung Washer
Samsung washers are automated. Being an electric appliance, its software might crash. This can be due to an imbalance of voltage or disruptive functionalities. Therefore, for the smooth running of the spinner, you should inspect the software of the Washer.
Reset the software of the washer as written below.
How to Restore My Samsung Washer’s Spinning Settings?
To restore the Samsung washer’s setting, use these steps:
- First, turn off the washer’s circuit or unplug the wire from the socket.
- Wait for 5 to 6 minutes. After that, plug the wire back into the socket.
- If this method doesn’t work, you can call the help desk at Samsung.
How Can I Find Why My Samsung Washer Is Not Spinning Clothes?
To find faults in your Samsung washer spinning, run diagnostics to find the error. This is how you can start diagnostics:
Running Diagnostic on Top Door Samsung Washer
Follow these steps to do the diagnostic test:
- Do not remove the plug from the socket.
- Press the power button to turn the washer on.
- After that, press the switch with the term “Temp.”Try to hold it until the LED lights are turned on.
- Now you can see the errors.
For an alternative diagnostic option, you can try this:
- Keep the Washer’s plug in the socket.
- Now press the switch with the term “Delay.” Try to hold it until you start seeing 17 numbers on the screen of the washer.
- Now hold the “Star” switch for at least 8 to 10 seconds.
- After that, press the “Self Care” switch to show CR.
- Now turn the knob of the Wash Cycle in a clockwise direction.
Running Diagnostic on Front Door Samsung Washer
You can use these steps to run diagnostics in the front door Samsung washer:
- Keep the washer plugged into the power socket.
- Now turn the power button to light up the LEDs.
- After that, turn the “Delay” button and Soil level to show 0000.
- Now press the “SPIN” button to display the letter D on the display that shows that the washer is in diagnostic mode.
- Now you can see the error.
Summary of Samsung Washer Irregular Spinning
In short, check your Samsung washer setting properly. After doing this, consider checking the spin cycle, removing the extension cable, and balancing the laundry load whenever the Samsung washer does not spin clothes properly.
Moreover, you should ensure that the door of the washer is locked properly. Further, also try to check the poor drainage system, washer belt, or motor, or reset washer software after any repair.