Bosch has been a well-known technology supplier worldwide since 1886. People enjoy using a Bosch dishwasher as it makes dishwashing effortless, but have you ever come across an error called E24? It has greatly upset the users, but no need to worry anymore. We have a solution for the E24 error code.
Error code E24 refers to the problem of draining. When a machine cannot drain wastewater, an E24 error pops up. The main cause of this error can be a blocked hose or filter. We will evaluate all the possible causes of this error and will guide you in detail regarding the solutions to this error.
What does Bosch dishwasher error code E24 indicate?
Bosch dishwasher error code E24 comes into view when there is some obstruction or clog in the draining tube. The majority cause of this blockage can be a bunch of hair, some plastic, or maybe food left over. Another reason that Error code E24 indicates is a dirty draining filter that needs cleaning or it may need to be replaced as well.
Error code E24 is an ordinary error, so if it appears, you should know that the draining pipe is blocked which needs to be cleared or you should see a draining filter for any waste over there.
What needs to be done if error code E24 appear?
First thing first, whenever error code E24 comes into sight, you should cut off the power of your Bosch dishwasher because it will take manual labour to reset. Error code E24 appears because of a clogged or blocked draining hose. Take a paper clip and clean all the waste inside the drainage system. Make sure there shouldn’t be any waste or food debris left.
(A few can cause the problem.)
What are the possible causes of the Bosch dishwasher error code E24?
If the problem remains the same as before after initial efforts and resolving all the possible problems, then it’s time to put yourself through some mechanical work, as you’ll need to open the dishwashing machine.
Choked or twisted hose:
Choked hoses can become a reason for error code E24 as there is no way the water can be drained because of the blocked way. As a result, the device will not perform in this case.
In this case, you must find the hose underneath your Bosch dishwasher to dislocate the draining pipe. To do this, you may require a screwdriver or a gripper to remove the clamp. Place an empty jar or bowl under the hose in case some water drips out.
Now pour some boiling water into the hose to clean it. Now you can use a cloth or tissue to clear any gunk stuck inside.
Make sure to find out the reason for the blocked drain before fixing it back. There is some industrial drain cleaning equipment that is used to clean out large waste causing a blockage in drains. These are preferred, but you can make one for your own by just using a cord and a hanger, and a drenched cloth.
Now after cleaning the hose, in case the problem remains the same, then there might be some clog in the draining vessel itself, so now you’ll need to clean the drain with a thin cord or some other resembling tool.
Another problem can be a twist in a drain hose. There might be some object under the sink that is blocking the way of the drain or causing a kink on the pipe; remove it aside gently and try to straighten the pipe so that water can flow properly. If it remains the same, it is advisable to change the hose.
Clogged Filter:
Another possible reason for an error code E24 can be a clogged filter as the mechanism of the Bosch Dishwasher contains an automatic water filtration process, so its drainage filter may be blocked, which could lead to an error code of E24.
Solution.
To solve the problem of Bosch dishwasher error code E24 due to a blocked filter, follow these steps:
• Find the place where the filter is located. It is possibly on the backside of the machine or it can be underneath.
• Now, after finding the filter, rotate it anti-clockwise and pull it up so that you can remove it.
• After removing the barrel-shaped filter, remove the coarse mesh filter from the bottom.
• Now, use a cleaning brush, some liquid soap, and hot water to clean the filter.
• Put the mesh filter back on the barrel-shaped filter and place it on the sink where it was located.
Waste disposal:
Waste disposal can be a cause of blocking your Bosch dishwasher draining system because the sealing or knockout plugs are removed while installing. If you haven’t removed it yet, you may need to remove it before any further cuts.
Also, the clog in the Bosch dishwasher is the result of older waste disposal, which hasn’t changed, and you are throwing out the garbage which has gathered inside the sink and causing a blockage.
Detached motor impeller cover:
Bosch dishwasher also contains a draining water pump that accelerates the liquid flow outside of the machine towards the hose. The drain pump is on the right side and behind the front panel. It throws waste water out of the dishwasher by using centrifugal force. The drain pump spins an impeller to drain water. The impeller directs water to flow in the right direction of the draining pipe and outside the machine.
This equipment is the most crucial part of the Bosch dishwasher mechanism. It looks like a fan located inside at the bottom of the sink. The impeller rotates at a very high speed and throws water outside the draining tube. There is a cover which is placed on it which is necessary to be placed accurately and firmly.
If the impeller cover is detached, loose, or dislocated and blocks the impeller rotation, it stops the draining process and can cause Error code E24 in a Bosch dishwasher. The impeller cover must be sealed in the right way, making sure that it isn’t coming in the way of fan rotation and protecting it from any food leftover or any other object that can affect or jam the impeller rotation.
If the motor impeller cover is loose or detached in your Bosch dishwasher, before fixing it, ensure there isn’t any waste from the impeller or any foreign object on it. If there is one, remove it gently without damaging the impeller. After ensuring the impeller is clean and can rotate freely, place the cover and seal it tightly. After fixing the cover, use your finger to quickly check that it is fitted perfectly.
Conclusion:
Now we are well aware of the meaning of error code E24 in the Bosch dishwasher as it refers to the upset of the draining process, and we know it appears for multiple reasons, as mentioned above. But there is nothing that complicated about finding a solution to this problem; all you have to do is follow this guide and get rid of this error referring to the draining problem.
In case the steps mentioned in the solution still don’t sort things out, it is advised to contact Bosch company’s helpline, or you can visit your nearest Bosch service centre to discuss the problem, as Bosch appliances are warranted or covered for a year from the date of purchase.
