The Bosch Dishwasher Error code E15 is an indication that leads to the flood protection system activation and water leak. Due to this error, a dishwasher can stop working properly. This error can be resolved by troubleshooting the system. In this article, we are going to provide a detailed guide on how to troubleshoot the Bosch Dishwasher Error Code E15.
Steps to Troubleshoot:
- Safety First
- Check for Water Leakage
- Clear Visible Water
- Check the Drain Hose
- Inspect the Dishwasher Base
- Reset the Error Code
- Test the Dishwasher
- Contact Bosch Customer Support or Technician
Safety First:
It’s very important to check out the safety before any troubleshooting. Turn off the dishwasher properly or unplug the power service. This will help to cut off the all power / current supply to the unit.
Check for water Leakage:
Now check the water dishwasher and its surroundings to make sure that there is no water leakage at all. Look for dampness, water dripping, and a puddle of water from the device. In case of any visual leakage fix it first then go for the next step. Here are some common leakages areas like hoses, door seals, and connections.
Clear Visible Water:
If you find any visible water in the dishwasher then wipe it with a towel or use a sponge that absorbs the remaining water. Make the surface clear as as possible. It is very important to clean the dishwasher perfectly because any standing water can cause an issue. Pay attention to the bottom of the appliance.
Check the drain hose:
Also, give a look at the drain house which is connected to the bosch dishwasher. Now make sure that it is properly connected to the device not kinked or clogged. Any kind of obstacle can lead to the error E15. If you find any issue make it clear to provide a proper drainage flow to the device.
Inspect the dishwasher base:
In this step, you have to inspect the base of the dishwasher and remove the lower access panel which is present on the front of the dishwasher. This will provide you access to the base of the dishwasher where flood protection is located. Check for any moisture or water down there. If any of the water-like stuff is available it shows a leak and an underlying issue that needs to be done.
Reset the Error code:
It`s time to reset the error code after checking all the above-mentioned steps now you can reset the dishwasher. Reset will be depending on the model/version of the dishwasher.
- Plug the switch again into the power supply.
- Turn on the button to pass electricity to the device.
- Press and hold the start button for at least 5 seconds.
- Hold it until the active indicators light turn off.
- The error will be removed from the display.
Test the dishwasher:
After resetting now test the dishwasher by running a short test to check if the E15 error code occurs again. Start the device and observe if it is working through the cycle. If the error does not appear again and the device started working properly without any issue it shows that the problem might have been fixed.
Contact the Bosch Customer Support or a Technician:
If the E15 error code will not fix after applying the all above-mentioned steps. Now you should consult with the technician and customer support. You must provide them with the exact issue, and your device number. They will assist you with the more beneficiary troubleshooting methods or guide you about the visit schedule if it necessary.
Causes of Error Code E15:
The Bosch Dishwasher error code E15 can be caused by water leakage or flood protection system activation.
- Water Leakage\
- Clogged Drainage System
- Faulty Float Switch
- Overflow or Excess Foam
- Other Factors
Water Leakage:
It is the primary cause of the E15 error is water leakage in the dishwasher. This may cause by many factors, such as:
- Damaged Door Seal: A damaged door seal can allow water to escape from the device.
- Loose or faulty Hose Connections: It can cause water leaks from the dishwasher, Triggering an error code.
- Cracked or damaged Tub: It can happen when the tub of the dishwasher has cracks, and water can escape, resulting in a leak.
Clogged Drainage System: A clogged Drainage system can lead to water accumulation in the dishwasher. It can cause the E15 error code. Some other causes of a clogged drainage system include:
Clogged Filter: If the dishwasher`s filter is clogged with debris, it can hinder the drainage process, and also leads to water buildup.
- Blocked Drain Hose: It is obvious blockage in the drain hose will lead to water accumulation.
Faulty Float Switch: The float switch is a factor responsible for detecting the level of water in the dishwasher. If the switch malfunctions or stuck. It can give signals to the flood protection system to activate, resulting in an error code.
Overflow or Excess Foam: In the case of excessive foam or overflow detergent leads to the E15 error code. This can occur if the wrong or excessive detergent is used, or if the detergent dispenser is faulty.
Other Factors: Many other factors can also contribute to the E15 error code, such as
- Improper Installation: It might be possible that the dishwasher is not installed correctly, it is also the major cause of the water leakage and improper drainage that leads to the error code.
- Malfunctioning Sensor: An issue in the water level or leakage sensor can incorrectly lead to the E15 error.
Benefits of Troubleshooting:
There are many benefits of troubleshooting and resolving the Bosch dishwasher error code E15 Some of them are listed below:
- Cost Saving
- Extended Appliance Lifespan
- Improved Efficiency
- Time-Saving
- Peace of Mind
- Enhanced Safety
- Improved Dishwashing Experience
Cost Saving:
By addressing the E15 error code and resolving the issue, you also can avoid unnecessary repair costs. Troubleshooting on time can prevent further complications that may require professional intervention or even the need for a new dishwasher.
Extended Appliances Lifespan:
By identifying the cause of the E15 error, you can help to prolong the lifespan of your Bosch dishwasher. Regular Maintenance and troubleshooting on time ensure the device functions properly and it may reduce the risk of recurring errors or other severe malfunctions.
Improved Efficiency:
A properly functioning dishwasher is energy efficient. It can save you money on utility bills. Resolving the error code it will allow the dishwasher to operate at its intended efficiency, ensuring effective cleaning and use of water.
Time Saving:
Troubleshooting and resolving the error code E15 can obviously save you time and effort. Instead of working on the malfunctioning dishwasher or scheduling service appointments. This troubleshooting allows you to continue using the dishwasher without any interruption.
Peace of Mind:
It’s a fact that a properly functioning dishwasher provides you peace of mind, knowing that your all kitchen appliances working properly. By resolving the E15 error code you can have confidence in the dishwasher`s ability. It can now avoid potential leaks or water damage that may disturb your daily routine.
Enhanced Safety:
Water leaks or electrical malfunctions can cause a safety hazard. Eliminating E15 can remove the risk of potential electrical accidents. Because often water-related accidents are caused by leaks. It ensures safer household equipment for you.
Improved Dishwashing Experience:
It`s common that a dishwasher with proper working and no errors are more efficient than a dishwasher with malfunctions. It will provide a more convenient dishwashing experience. By troubleshooting E15 errors, you can enjoy the convenience and time-saving benefits of a fully functional dishwasher.
Conclusion:
The bosch dishwasher error code E15 can cause by a water leak or flood protection. By using the troubleshooting shooting steps discussed in this article, you can diagnose or resolve the issue immediately. However, if the problem exists again or does not resolve by troubleshooting then it is highly recommended to consult with the expert technician or call Bosch Custom Support. They will help you to repair your dishwasher perfectly.
