Did you forget your programming code for the Schlage keypad lock? If yes, no problem. You can reset the lock without the source code. Restoring the settings of the Schlage lock seems a bit tricky. But it’s possible to do it with a few techniques. In this resetting procedure, you have to perform manual steps to get control over the coding system.
In the meantime, it had recommended that you always have the programming code for resetting the Schlage electronic lock. However, if you have forgotten the code, you might need to reset it without the source code. Therefore, it had recommended to resolve this problem cautiously.
This article will guide you in resetting your Schlage keypad lock with the programming code. Moreover, it will help you explore the tricks to regain control over the programming system of the lock. Let’s delve into the topic to get a better understanding of it:
4 Steps for Resetting a Schlage Keypad Lock (without Programming Code)
When you don’t have the programming code of the electronic lock, you have to reset it manually. For this reason, you should have access to the internal and external assembly of the Schlage keypad lock. Otherwise, resetting the lock without the source code will become impossible.
Additionally, you should first consider applying the instructions mentioned in the user guide to resolve this issue. You can also contact Schlage support service. However, if you still do not know how to reset the lock without the code, you can try the method mentioned below.
This procedure has four steps, and it works on almost all the Schlage keypad locks. Most commonly, it is useful for Schlage BE365 and FE595. Here are its steps:
Step 1 – Open the Door
First of all, to manually reset the lock’s door, you have to make sure that the door is open. The reason is that you need to access the internal and external structure of the lock at the same time. Hence, this is possible only when the door had opened.
Step 2 – Take out the Batteries
In the second step, reach out to the internal side of the door lock. Carefully remove the cover of the battery compartment. Now, take out the batteries from their housing. This step had done to deactivate all the saved settings in the electronic lock.
Step 3 – Press the Schlage Key and Release
Now that you have disconnected the batteries, move forward to the exterior side of the door lock. Locate the “Schlage” button on the keypad of the lock. Once accessed, press the button and then release it. This will signal the lock to enter the programming code manually.
Step 4 – Again, Push the Schlage Button and Hold
Lastly, by keeping the door in an open position, make sure you have access to both the internal and external structure of the lock. Now, you have to do two things simultaneously. Put the batteries back into the housing and press the Schlage button, plus keep holding it.
You have to push the Schlage key until the look flashes green or beeps a single time. If this happens, your Schlage lock had successfully reset. However, this step is crucial and needs to be performed within 10 seconds. Otherwise, this entire process of resetting will fail.
4 Tricks to Regain Control over a Schlage Keypad Lock
After the Schlage lock is reset, all customized settings had erased. In simple terms, the lock will return to default factory settings. Therefore, you have to ensure that the lock keeps providing security to your space. In other words, reprogram the lock.
Modify the Preset Programming Code
A preset programming code is a 6-digit default code that comes with each Schlage keypad lock. It serves as a source code that enables you to adjust your lock’s settings. For example, you can add or remove user codes, enable auto-lock mode, activate vacation mode, etc. If you’re unaware of your Schlage lock’s preset code, check the backside of the keypad for an imprinted sticker.
However, to ensure security, it’s advisable to change the preset programming code of your Schlage keypad lock. This prevents any unauthorized access to your home or office. While you might have previously altered this code, resetting a Schlage keypad lock will restore the default programming code.
It means the customized code had erased. Consequently, modifying this programming code becomes necessary to keep the security of your space intact. If you own a Schlage BE365, FE595, or a similar model, click here to get a detailed procedure for changing the preset programming code.
Alter the Initial User Codes
A user code is a unique combination of digits with a user ID. Each user ID corresponds to a specific individual with access to the lock system of your space. Apart from the preset programming code, Schlage keypad locks come with two default user codes. To find your lock’s preset user codes, check the backside of the keypad or refer to the user manual.
For security reasons, it is advisable to remove these preset user codes and replace them with new ones. Most Schlage keypad locks allow you to create up to 19 user IDs, each with its unique user code. This flexibility lets you generate multiple user codes and share them with those who need access to your home or office.
While you might have modified user codes in the past, resetting a Schlage keypad lock erases all previous user codes.
Consequently, the lock will operate solely with the two user codes preset initially. Therefore, it’s necessary to modify these codes once again. To do so, consult the user manual for instructions on altering the initial user codes. If you don’t have the user manual, you can find a solution here.
Activate the Auto-lock Feature
In today’s fast-paced world, everyone is often in a hurry, leading to instances where locking the door might be forgotten. To address this concern, Schlage keypad locks come equipped with a smart auto-lock feature. This feature is designed to bolster security when door locking is overlooked.
Once activated, it automatically engages, locking the door after a predetermined time frame. It’s crucial to enable this mode to enhance the security of your space. However, it’s important to note that when a Schlage keypad lock is reset, all its settings revert to default.
This means that if you had previously activated the auto-lock mode, it would now be deactivated. Consequently, you need to reactivate it to ensure your home’s security. Refer to the Schlage keypad lock’s user manual for guidance on this, or visit this link for a general procedure on enabling the auto-lock mode.
Turn on the Vacation Mode Setting
Much like the auto-lock feature, vacation mode is another advanced offering of the Schlage keypad lock. This feature proves invaluable in heightening your home’s security while you’re away on vacation or from your residence. To understand its utility, envision a scenario where you’ve shared user codes with friends and family. However, when you’re absent, you wouldn’t want them to retain access to your space.
Instead of erasing those user codes, you can conveniently activate vacation mode. Upon activation, this mode temporarily disables all user codes. This ensures unauthorized entry is a non-issue during your absence. To learn how to activate this safeguard, click here for step-by-step instructions.
Final Thought
In summary, resetting the Schlage keypad lock necessitates access to both the internal and external components of the lock. As a result, resetting the lock isn’t possible unless the door is open. Furthermore, once the restoration process is complete, you must regain control over the programming settings.
This entails modifying the preset programming codes and user codes. You also have the option to reactivate the auto-lock and vacation modes if they had previously enabled. Hopefully, this article has assisted you in resetting your Schlage lock. Alternatively, you can consult the user manual or seek guidance from Schlage customer support if needed.